The MSR PolyGard®2 SC2 petrol vapour gas sensor is a catalytic bead sensor including value processing and integrated self-diagnosis, for the continuous monitoring of the ambient air to detect petrol vapours. It is supplied with 5 V DC from the board (SB, WSB, MSC) and transmits its measured values digitally via the MSR local bus.

Features of the SC2 petrol vapour gas sensor

  • Measurement value processing incl. temperature compensation
  • Internal functional control with integrated Watchdog
  • Easy maintenance and calibration by exchange of the sensor head or by comfortable on-site calibration
  • High accuracy and reliability
  • Sensor head with long life expectancy
  • Hardware and software according to SIL compliant development process
  • Reverse polarity protected, overload and short-circuit proof
  • IP65 protection (when installed)

Petrol vapour gas sensor specifications

Gas Petrol Vapours
Measuring range 0–100 % LEL (P3496-A)
Sensor Catalytic bead
Power supply 5 V DC from board (SB/WSB/MSC), reverse polarity protected
Interface Serial interface local bus 1-wire / 19200 baud
Sensor housing Plastic, type L: Ø 24 x 30 mm, IP65; stainless steel, type S: Ø 30 x 61 mm, IP64, only with cable extension
Cable extension 05, 10 or 15 m (00 = without cable extension, standard)
Temperature range -30 / +60 °C
Life time in air > 5 years
Calibration interval 6 months
Relative gas density (air = 1) n.d.
Mounting height Depends on the relative gas density (not stated in the datasheet for this gas)

Ordering

Order code: SC2-P34XX-X-X-XX (sensor element and measuring range, sensor housing, cable extension).

Datasheet (PDF)